train track spike is a railway facility that we often see on the way to travel, and it is also a relatively weak link on the railway. How do we go about installing it? Because the switch equipment procurement number, installation is also an important thing. So today, train track spike manufacturers are here to tell you how to install train track spike correctly.

Before the construction of the train track spike device, technical disclosure should be carried out to clarify the standards and requirements in the installation process. Prepare tools such as square wood, square feet, Angle steel pad, hole punch, and iron needle. Also carefully check whether the specifications meet the requirements.

We need a square clip on the straight base rail with the square foot straight arm edge overlapping the center line of the connecting rod. Use a steel needle (or special pen) to draw the connecting rod center line on the two basic guides. This line is the reference line that determines the position of the Angle iron and plays a key role in the box of the entire mounting device.

When the train track spike has adjusted the stickers and openings, adjust the switch mark. By adjusting the buckle sleeve and nut at the joint of the identification rod, the fixed and reverse position indicates that the gap is equal. After the switch indication is adjusted, tighten the indicator rod nut. Then adjust the pull position of the switch machine by adjusting the lock pull bar of the switch machine.

train track spike https://www.hbrailwayfastening.com/Track-spike-Dog-spike.html