tea plucking machine wholesale is mainly used in farmland ploughing machine accessories, its shape is knife-like. In the use of the blade, there are many matters worth noting, the following is a brief introduction to the use of precautions, hope to give you the use of the blade to bring some help.

1, when the blade is running, the operator should be strictly prohibited from approaching the rotating parts, and there should be no one behind the plow machine, so as not to hurt the blade during use.

2, when checking the blade, you must first cut off all the power. When replacing the blade, the tightness of the rotating part should be moderate.

3, the speed of farming should be controlled, generally speaking, the dry field should be at a speed of 2 to 3 km/h, if it is tilled or raked, it can generally be at a speed of 5 to 7 km/h, if it is paddy field farming can be appropriately increased, but pay attention to, the speed can not be too high, To avoid plow machine overload operation and damage to the power output shaft.

4, when the blade is working, the wheel of the plow machine should walk on the uncultivated land, so as to avoid compacting the cultivated land, before the actual operation, the wheel base of the plow machine should be adjusted so that its wheels can be located in the working range. When working, you should also pay attention to the method of walking to prevent another wheel from compacting the already cultivated field.

5, in the operation, if the knife shaft is found to be too tangled with grass, it should be stopped to clean up, so as not to increase the load of the plow machine.

6, when ploughing, it should be noted that the hanging part can not be manned.

7, if you need to reverse the work, you should put the deputy gear shift lever in neutral to hang the reverse, at work, try to avoid the use of the steering clutch, if you need to turn, you can use the armrest frame. When turning, you need to reduce the throttle first.

8, before use, it is necessary to check whether the fixing bolts and universal joint lock pin connection of each part are reliable, whether the blade is installed backwards, and it can be used again after determining that it is normal.

When using tea plucking machine wholesale, you should pay attention to the above points of attention. Because the equipment uses gasoline or diesel as the power source, once the operation is wrong, it may cause damage to the plow machine, and even cause injury to the operator in serious cases. Therefore, it is necessary to master the correct operation points.

tea plucking machine wholesale https://www.keylead.cn/Electrical-Tea-Plucking-Machine